Equipment

Milling Machine Capability 

Numerically Controlled Horizontal and Vertical

• Viper VMC-4000-5BC, 158"x78"x39”, 6 axis
• Cincinnati Magnum 800-H5, 61"x47.8"x47.8”, 5 axis
• Cincinnati H500 Horizontal, 72"x54"x50”, 5 axis
• Cincinnati Saber 1000 Vertical, 40"x20"x22”
• Toyoda FA 650 Horizontal, 39"x 39"x15”, 5 axis
• Cincinnati V/C 30/120, 70"x144"x32”, 5 axis
• Nigata HN100D, 79.9"x65"x47.2”, 5 axis
• Toyoda FA630 23.6"x23.6"x22”, 5 axis
• HAAS VS3, 150"x50"x50”, 4 axis
• HAAS VS1, 84"x50"x50”, 4 axis
• Two Hurco VMX42, 42"x24"x30”, 4 axis
• Cincinnati Saber 750, 25"x15"x30”
• HAAS VF6, 64"x32"x30”
• HAAS VF-5 VMC, 50"x26"x30”
• SNK HPS 120B, 3150 mm, 1320 mm, 762 mm, 5 axis
• Cincinnati Milacron, 120"x30"x24”, 5 axis
• Mazak Vortex, 120"x32"x 24”, 5 axis
• Mazatech Horizontal H500/50N,  28.35"x 25.59"x25.59”, 4 axis
• Mazak FH8800, 51.18"x43.3"x 39.37”, 4 axis
• Yamazaki H630, 39"x31"x30”, 4 axis
• Two Matsuura RA1GII , 20"x16"x18”, 3 axis
• Cincinnati Lancer 1500 vertical, 60"x30"x30.5”, 3 axis
• Cincinnati Lancer 2000 Vertical, 80"x30"x30.5”, 3 axis
• Hüller Hille NBH350 Horizontal, 102"x63"x55”, 4 axis, 2600 mm, 1600 mm, 1400 mm

Turning Capability 

Numerically Controlled

• DMG Mill Turn, 5 axis
• Mazak Integrex 200 IV S Mill Turn, 5 axis
• Okuma Howa VTM 100 Vertical Lathe
• Mazak Multiplex 630 Twin Spindle
• Okuma Captain L470 19 swing 26.38 between centers
• Mazak Quick Turn 20
• Three Hyundai CNC Lathes, 10"x17”
• Kia Lathe, 10"x40”
• Mazak 200SY Integrex, 12” turning diameter x 20”
• Mazak Multiplex 630, 26” turning diameter x 57”
• Toyoda GU-100 Universal Grinder, 12” grinding diameter x 39.4”
• Mori Seiki SL7 Lathe, 30"x61”
• Mori Seiki SL4 Lathe, 21"x30”
• Mazak Super Quick Turn 18 m with Mazatrol T Plus Driven Tools & C axis,  21"x20”

Manual Lathes

• Clausing, 17"x80”
• Clausing, 21"x80”
• Hardinge, 10"x18”
• Lagun, 32"x10’
• Wolf, 24"x10’

Fabrication Capability 

Welding Equipment

• Panasonic Robotic Welder
• Lincoln Dual-Wire Submerged Arc
• Miller (MIG), 2 each
• Hobart (MIG), 6 each
• Miller (TIG), 7 each
• Miller 48” Lathe Welder, 2 each
• Liburdi Welder (Orbital)

Sheet Metal Equipment

• Wiedemann 30-ton Punch
• Press, Amada 88 ton x 8”
• Shear, 1/4"x120” N.C. Backgauge
• Band Saws, Do All, 36”
• 5"x8’ Comeq Roll
• 4"x4’ Comeq Roll
• 15-ton Di-Acro Press
• Western Arctronics Spot Welder
• 1-ft² Vibratory Finishing Machine
• 3-ft² Vibratory Finishing Machine
• 4-ft² Vibratory Finishing Machine
• Montgomery Roll, ¾“x10’x10”
• Mazak Fabrigear 150 Laser Cutter
• Mazak Super Turbo X Mark II Plate Laser

Composites Capability

• Automated Ply Profiling: CNC-controlled conveyor cutting bed – 3.5 m, 1.8 m (cutting area)
• Clean Area, Room 1: 7125 ft², 662 m²
  • Positive pressure controlled
  • Temperature/humidity controlled
  • Particle count monitored

• Clean Area, Room 2: 3,700 ft², 342 m²
  

  • Positive pressure controlled
  • Temperature/humidity controlled
  • Particle count monitored 

• Wet lay-up area: 700 ft², 65 m²

• Autoclave 1: 83” dia. x 204”, 2.1 m, 5.2 m
  

  • Cure up to 200C
  • Pressure 100PSI

• Autoclave 2:99 dia. x 240”, 2.5 m, 6.2 m
  

  • Cure up to 260C
  • Pressure 145PSI
  • Nitrogen purge equipped

• Oven:  117"x118’x100”, 2.97 m, 2.99 m, 2.5 m
  

  • Cure up to 200C

• Trim/Finishing Area: 5,500 ft², 512 m²

• Machining: CMS ARES 4826
  

  • 5 axis, twin shuttle table, carbon shielded router
  • x = 4.8 m, y = 2.6 m, z = 1.2 m

Assembly Capability 

Clean Rooms for Assembly and Checkout

• Class 300,000 4,000 ft²
• Class-100,000 High Bay
• Electrical and Electronics Assembly

Inspection and Test 

 Inspection      

• Wenzel Extreme LH20.50.15 CMM, 79"x197"x59”
• LK G-90C CMM, 48"x80"x42”  
• LK G-80 CMM, 40"x48"x34” 
• Ziess CMM, 47"x129"x40”
• Optical Comparator (Shadowgraph)
• Lenox 25-ft Borescope, 48"x80"x40”
• Helium Mass Spectrometer, 36"x48"x30”
• Brown & Sharpe Micro-Hite 900

NDE

• Lorad 300 x-ray film machine
• Digital 3-axis x-ray on 40-ft rails
• Type I and Type II Dye Penetrant Inspection